Atwood Furnace Dinosaur board swap

[RSOMEDAY]

I have just installed a new Dinosaur UIB L board in my Atwood 8535 furnace but the board does not have a spot to connect two wires one is coming from the breaker fuse the other from the gas control valve solenoid has anyone else done this Conversion? I have emailed both Atwood and Dinosaur for instruction neither have responded.

[RV Wizard]

Hello and We are glad to have you join us here and we look forward to reading of your adventures and experiences. I am sure you will enjoy our website and forums. Good luck, stay safe and keep us posted.
The UIB L is not what you want to install in the newer style furnace. You should check out http://www.dinosaurelectronics.com/UIB_Chart.htm and you will probably want to use the Fan 50 Plus board that can handle the two wires you are asking about.

[RSOMEDAY]

Thank you