I was hoping that somewhere out there someone would know how to get the housing off the hot water tank to work on it. It takes a Torx bit and we have tried so many and so has Camping World and they can't find the one that fits....
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
If it looks like the one below, and has eight "splines," it is not a Torx screw. A Torx screw has six "splines." Instead, it is a double-square screw. You use a square bit on a double-square screw. The square bit size is #2.
__________________
Mark 2008 Holiday Rambler Admiral 30PDD (Ford F-53 chassis) 2009 Honda Fit Sport
If it looks like the one below, and has eight "splines," it is not a Torx screw. A Torx screw has six "splines." Instead, it is a double-square screw. You use a square bit on a double-square screw. The square bit size is #2.
Thank You,
We will be looking for this and try it out.
Hi , I didn't know how to put a new post on for this...Fuse boxes for a 2007 Coachmen Motor home. We have all the lights but the tail lights, Have been looking for a fuse for them but can't find one. I was hoping if anyone out there could give a info on it.....
Thank you
Gloria
Coachmen Aurora 2007 fuse boxes
Linear Mode
