We have the above furnace in an Air Stream Base Camp 16X. It worked perfectly on our trip to Alaska plus the first 2 nights here, now it will not light. The fan runs but no gas valve click nor flame ignition. Any ideas?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
An RV furnace needs to see the sail switch closed before the ignition cycle starts .
Do you have the manual for the furnace ?
The issue can be ;
A bad sail switch .
Low fan speed ; due to low battery voltage or problems with the motor.
Restrictions in the furnace output vent , or cold air return ; that might slow the air flow through the furnace fan .
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
The sail switch is the most likely. I'm taking a look today to see if I can access it without pulling the unit out. So far we are getting along with the heat strip on the ac unit.
Linear Mode
