I went to plug my RV to shore power and it's popped the house breaker after a minute or so after. Noticed the inverter will turn on and while going through it's wake up cycle it will start flashing an error "code 17" and will not convert power. the batteries are reading good and the RV while running will charge them. the generator while running, will power the RV but sounds like the converter/inverter is making popping or glitching sound. Any ideas, Thanks
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Thanks for your reply. I have read this and was wondering if I could get possibly any more info on this code and what is affected. unit runs, just flashing code and transferring power etc.
OK, after calling Xantrex , Error code "17" is a very rare code that pops up telling you that the "Internal current sensor" has failed and is not repairable. They are sending me a new unit.
Freedom XC2000 problems
Linear Mode
