Generator Maintenance & MANUALS Onan & Generac & PARTS

[bilb2765]

Originally Posted by kidoo

Any suggestion to install a rail system for my Gen set, 7500 Onan?

I have seen them. Guy with a food truck has one in his truck.
Think the truck is a Grumman. Maybe they have info. Maybe ask them as if you have a food truck, and your rail was damaged.
My2cents

[kidoo]

Originally Posted by bilb2765

I have seen them. Guy with a food truck has one in his truck.
Think the truck is a Grumman. Maybe they have info. Maybe ask them as if you have a food truck, and your rail was damaged.
My2cents

Thanks, great info.

[Affinityfan]

Dropping my generator off for the 18 yr service appointment. They are going to pull it, pull the radiator and flush or replace, replace the belt, replace the heat sensor and maybe the water pump. Probably need the thermostat changed as well. I hope I get another 18 out of it

[skeeterlan]

How many hours on the generator

[OlBeaver]

I have a Onan 6500 watt Diesel Gen. I'm having trouble regulating output from the genset to the transfer switch. The switch is looking for a specific range. After looking through my owners manual it said if this occurs to manually adjust the throttle until you meter the correct voltage. I made the adjustment and the transfer switch picked right up. Several days later I tried again and a found that the problem had re-occurred. Can anyone help with this one?

[hearnsconst]

onan 4kw starts then stops code 36

[Alotofusguys]

Hi,
I made a purchase today on impulse. I was given the opportunity to purchase the above said Generac. I did not get the inverter or the 12 pin cable. What are my options? Is there any chance of using a differnt inverter? Any info or hacks known would be greatly appreciated.