Having problems hooking up a Girard Tankless Water Heater
I have a 2020 Arctic Fox 811 Camper. I decided to switch over to a Girard Tankless Water Heater. I got the factory One removed and installed the new Girard Unit. Water lines and Propane line hooked up. Moved on to the electrical, it only has 4 wires coming out of the back. The 2 blue wires go to the two black wires coming out of the controller. The Red wire 12VDC (+) I connected to the Rieco Titan 12VDC box to the Positive terminal and the Black wire (-) negative to the negative terminal 12VDC. When I turn everything on and try to turn on the monitor it either blows the little 10 amp fuse out side on the unit or the 10 amp inline fuse I installed on the positive lead on the back of the unit. Suggestions?
|