Hi guys. I have a Itasco sunora on a workhorse chassis and the Indicators have stopped working, the hazard lights work correctly but not the directional indicators. I can't locate the fuse on the panel or the flasher unit which assume works because of the flashers. Anyone with any ideas on what I can do? finding help here in the UK is hard to do. Thanks. Ken
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Hi guys. I have a Itasco sunora on a workhorse chassis and the Indicators have stopped working, the hazard lights work correctly but not the directional indicators. I can't locate the fuse on the panel or the flasher unit which assume works because of the flashers. Anyone with any ideas on what I can do? finding help here in the UK is hard to do. Thanks. Ken
Ken
Although they are usually the same lights and bulbs, the operation of the 4 way hazard lights and the directional signal lights are usually controlled/operated by 2 different flashers and protected by 2 different 12V fuses.
Mel
'96 Safari
Thanks Guys for your help, I will get this sorted out but for some unknown reason all the markers on the fuses etc have been removed so I am working in the dark but the help offered will help greatly. Thanks again. Ken
Linear Mode
