Just arrived in Arizona after spending a couple months in Texas. When I arrived and hooked to the city water there was very low cold water pressure in al the faucets and toilet. I switched to the water pump and same low cold pressure (fresh water tank is full). The hot water works fine. I let the water run for a few minutes on both city and water pump but still low cold water pressure. I removed the water filter thinking that may have gotten clogged. No change, still low cold pressure. I relieved pressure on the hot water tank and also checked that all valve's in the docking station were parallel to the water lines. I have run out of ideas if anyone has any I'm all ears!