Norcold 1200 lrim 2004 Dynasty w/JC Refrig.120v hvac
Ever since I put in the jc refrigeration 120v assembly I would periodically get a HE code. No big deal, one of the heater terminals is left unused. Last night it was flashing a dc LO code, but working fine. Turned it off and on repeatedly it would flash a ac LO code. Continued this morning, all the voltages at the board checked out. But when I first pulled the dc supply wire it showed nothing. After replugging the wires it started back up and shortly threw the low ac code ( I have 124v here, both legs, very stable) The dynasty 12v to the fridg is a yellow/white from the lower left board in the rear run panel. Pulled the fuse, reinserted, pulled the plug and reinserted. All appears to be well after 5 hours. Posting this to maybe save someone else the headache of believing the codes mean what they're supposed to. They alerted me to a problem, but throwing ac codes for a dc problem is strange. I'll follow up if things go south again.
|