Onan 5.5 HGJAC Error 14
I have an Onan 500 HGJAC model gas generator that gave me a code (can't remember which one) that made me think the Air filter was clogged or needed replacing. I didn't have one, so I cleaned it and it started working again. I was so happy, that I forgot to put the main cover back on. 7 hrs later (running without the main cover), it died. I tried to start it again and now I get an error code 14 and dies instantly. I don't think itís the carburetor as it was running fine before I forgot to put the main cover back on and It will run for about 20-30 secs if I remove one of the wires on the brushes and hold the start button down.
FYI, I tried opening P1 pin 15 and 20 (kill/ground on fault I think) with no change.
Per manual - Inspect ignition kill leads in harness and at connector P1: repair or replace lead, terminal or pins as necessary. IS that pins 15 and 20?
Any input is welcomed.