|
Onan Generator Error 24 - Need Help Finding Wiring to trouble shoot
I have a 8k Onan HDKAK that's giving me an Error 24 code.
According to a manual I found online I need to do the below. Can anyone help with where these wires and the coolant temp sender are located?
1.Check the leads from the current transformer (CT-1 and CT-2) for proper connection. Ensure there are no breaks in leads and ensure continuity.
2.Remove the top housing panel. If loose, reconnect engine harness spade connector E3-1 to the coolant temperature sender.
3.Disconnect engine harness connector P1 from the control assembly. Check for electrical continuity between pin P1-12 and connector E3-1 and for missing, bent or corroded connector pins and repair as necessary.
4.Replace the coolant temperature sender.
__________________
- Thanks, Jeff
'04 Travel Supreme 40DS03 - Cummins ISL 400HP
'98 Monaco Dynasty Duke
|
Linear Mode
