Pac Brake wiring diagram 2005 Monaco

[maxwell18]

I removed all my switch's and other attachment on my side panel to rebuild it. I damaged my Pac Brake and purchased a new one and installed it. Now I don't have my Pac brake. I have looked up the wiring diagram and it shows a straight with on and off. I thing the other connections are for the transmission. I'm trying to trouble shoot the problem and don't know what to do. Any suggestions? THANKS

[RKins]

If it's a typical Pacbrake system and only the cylinder was replaced then nothing should have changed on the engine end of the system. My Pacbrake cylinder casting broke and I replaced the entire cylinder - the only connection was an air line.
What you did up front, I have no idea. Typically there is an on/off switch up front and the VIM (mine is on the front side of the firewall)/TCM in the tranny takes care of the rest. Here is a wiring drawing of a basic system.

[Mark-]

Here is a schematic for the exhaust brake on my coach.

[RKins]

That looks like a detailed drawing - thanks for posting.