Power Gear Slide One motor going out the other is coming in

[ptl]

I have a 2008 Winnebago Journey 39Z and I had to change one of the motors on my driver's side slide. The slide has the dinette and couch in it. After I finished I pushed the out button and the new motor wants to retract and the other motor is tying to extend. The slide is a Power Gear RPE Digi-Sync slide with 2 rails and an electric motor for each rail. Here are pictures of the control module, the motor and the board inside that you use to extend and retract the slide.

[MrMark52]

Reverse the two power wires going to the new motor.

[ptl]

Thank you MrMark52. I did just like you said and and everything worked like it should.

[MrMark52]