Powergear Leveler Hydraulic Fluid level.

[jondrew55]

This is my second MH with a powergear leveling system and both have exhibited the same problem when new. The control panel would sound an alarm and all lights would flash when driving, usually when making a turn. The dealer said the fluid level was low? Even though when looking at it in the tank the level seemed to be above the float sensor. After adding fluid I used Dextron III type as the lable on the tank said) the problem stopped.

Do these units need to be filled often? I can't imagine people driving around with that annoying alarm going off. Mine was so bad I had to remove and unplug the control panel until I could get my hands on some fluid to add.

[CLIFFTALL]

Sounds like you have or had a leak.

[jondrew55]

I added fluid to my first rig and the problem went away and never happened again for the year I owned it. I just added fluid to the new one yesterday so time will tell. I'm just suprised you have to fill the tank so high for the sensor to be happy.

Originally Posted by Clifftall

Sounds like you have or had a leak.

[CLIFFTALL]

You can speak to a tech at Lippert ( they bought PG ).

574-537-8900.

Please update us here if you do..