See Level II 2nd Monitor in Wet Bay

[TraceJohnson]

I have installed the new See level II system in my Coach and used existing wires from old system. I now have obtained a second monitor to install in the Driver side Wet Bay. The sensors are on passenger side straight across from Wet Bay.

Do I just have to run the 'Blue' wire from sensors and a ground? Do I need to provide 12VDC to second monitor?

Help!

2000 Monaco Dynasty
2021 GMC Canyon Denali

[Ljwt330]

Originally Posted by TraceJohnson

I have installed the new See level II system in my Coach and used existing wires from old system. I now have obtained a second monitor to install in the Driver side Wet Bay. The sensors are on passenger side straight across from Wet Bay.

Do I just have to run the 'Blue' wire from sensors and a ground? Do I need to provide 12VDC to second monitor?

Help!

2000 Monaco Dynasty
2021 GMC Canyon Denali

Look at the installation manual for your model. From what I can determine, you wire the second display in the same way, using two wires, then you need to program the new display for its function as a secondary display.


For system 709 RVC-NLP, the instructions start on page 10.

[TraceJohnson]

Ok thanks

[dp7]

Originally Posted by TraceJohnson

I have installed the new See level II system in my Coach and used existing wires from old system. I now have obtained a second monitor to install in the Driver side Wet Bay. The sensors are on passenger side straight across from Wet Bay.

Do I just have to run the 'Blue' wire from sensors and a ground? Do I need to provide 12VDC to second monitor?

Help!

2000 Monaco Dynasty
2021 GMC Canyon Denali

You need 12v also to power the second display.