Quote:
Originally Posted by TheFu
So I made the cable. Labeled it (but got the labels backwards so I am not posting that pic and confuse someone). I tried it out and we made a step forward. Now at least, the Xantrex still reports back to the RV-C correctly its status and data (before if I added the Cerbo it went to 0A). That said, I have yet to see the Cerbo GX on the list of devices connected to the RV-C CanBus in Silverleaf. Also, I cannot see how to change the Silverleaf to "Custom" as instructed by the Silverleaf tech. Maybe I wrote something down wrong. I see where I can change the "Battery Model" from "Conventional" to about five different brands of LI (none of them my Epoch - but that is expected). Supposedly I can change it somewhere to "Custom" and put in the charge params for my battery type. And, of course my hope is to get the SOC data from the Cerbo on some screen or another.
|
Did you set the port in the cerbogx to be RV-C? There's a setting for each of the can ports for their communication types.
__________________
"Shorty" 2008 Prevost XL2 40ft, Detroit S60, 20K genset,dual 5k Victron Quattros 48v, 20Kw LiPO,5040w solar and just getting started
|
Linear Mode
