I have no experience with these coolers, but I did look at the installation instructions for the CF80. Did you set up and install your unit according to the instructions? (Particularly the caution to be sure you align the mesh panels in the cover with the vents in the cooler)
Any compressor type unit will need to expel the heat extracted from the inside, but I didn’t see any specified clearance requirements.
__________________
John and Diane (RIP Lincoln, 21 FEB 22) RVM103 NHSO
Fulltimers since June, 2012
2002 Dutch Star 40, Freightliner, Cat 3126, 2004 Element
|