would like to install a camera on the back of the trailer just above the window
will drill a maybe 5/8 to 3/4 hole all the way through to inside cabinet,then
down the right conner and back out under the trailer
What would be the best sealent to fill the hole with were the wire goes to
the camera?
I have a couple pictures of were I want to do this first is back of trailer
want to put hole between U and G next pic is inside of trailer showing cabinet
and right side were I want to run the wire down the wall.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
camera is ordered and on its way 5/3 I want to hide the wires thats the
reason for drilling and running them inside.
the camera i'm getting is from rearview satefy.com 770613-213
made for 5th wheels,the DW liked the idea of drilling into the cabinet
to hide the wires so i'm drilling
Linear Mode
