Community Forums

bgoff46 · 04-17-2021, 11:13 AM

Anyone happen to know how the HDMI Cable is run to the bedroom TV on the 29M floor plan?Is it accessible for replacement and how to do it?

My TV in the bedroom does not get a signal. I have verified the TV works by hooking up my house DVR and playing a movie on the TV.
I have traced all HDMI cables and moved the HDMI cable for the bedroom to a new location in the splitter that i know works. ( I swapped it with the Kitchen TV location on the splitter; Still no signal.

Assumption is that the cable is bad, and needs replacement.

Any idea's

Dutch Star Don · 04-17-2021, 11:24 AM

First off.....there are probably 20 models/brands of RV's that have a 29M floorplan. You need to supply a little more info for better help with your issue.

Typically, these cables are run during construction and can't be easily replaced. You have two options....run a new cable through areas you can access, or use a wireless unit. I bought the wireless set up for a prior coach when the HDMI cable went bad. They're available on Amazon.

https://www.amazon.com/IOGEAR-Wirele...s%2C233&sr=8-5

SKP Kirk · 04-17-2021, 05:05 PM

I agree with Don. Before you start trying to replace that coaxial cable, use an ohm meter to check it out. Look for 1000+ ohms between the center wire and the woven wire shielding. Then use a jumper to connect between the center tap and the shielding at one and and go to the other and look for a reading of 0 ohms.