Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > iRV2.com COMMUNITY FORUMS > iRV2.com General Discussion
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 07-30-2017, 10:56 AM   #1
Senior Member
 
camperkids's Avatar
 
Join Date: Aug 2011
Location: Bel Air, Maryland
Posts: 253
changing washers splendide 2000 to splendid 2100 XC

While trying to update clothes washer from a broken Splendide 2000 to a Splendide 2100 XC ran into a problem. The washer is located in the bathroom cabinet, I got it out of the cabinet but ran into a problem with getting it through the pocket door to the dinning room. The pocket door sticks out about 1 1/2" just the amount that I need to clear the door, how do I get the door in further or do I have to remove the door and if so how? Any ideas or suggestions are appreciated. Thanks in advance, Jim
.
__________________
Jim/Lois 1999 Newmar Mountain Aire MACA3797 F53 - V10
Bel Air, Maryland 5 Star Tuning & Air Lift Bags
camperkids is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 07-30-2017, 11:16 AM   #2
Senior Member
 
gerdutch's Avatar
 
Join Date: Nov 2010
Posts: 386
My p[cket door hangs on two sliding knobs and can be released by sticking a flat screwdriver at each one and unlocking the retainer . Easy enough to do. But do you have enough clearance to remove the door or will you need to remove some trim?!
__________________
02 Allegro Bus. Freightliner
ISC 350 Cummins
2019 Chev Colorado
gerdutch is offline   Reply With Quote
Old 07-30-2017, 11:46 AM   #3
Senior Member
 
camperkids's Avatar
 
Join Date: Aug 2011
Location: Bel Air, Maryland
Posts: 253
Quote:
Originally Posted by gerdutch View Post
My p[cket door hangs on two sliding knobs and can be released by sticking a flat screwdriver at each one and unlocking the retainer . Easy enough to do. But do you have enough clearance to remove the door or will you need to remove some trim?!
Thanks gerdurch we'll check it out.
__________________
Jim/Lois 1999 Newmar Mountain Aire MACA3797 F53 - V10
Bel Air, Maryland 5 Star Tuning & Air Lift Bags
camperkids is offline   Reply With Quote
Old 07-30-2017, 12:02 PM   #4
Senior Member
 
Mr_D's Avatar
 
Country Coach Owners Club
Solo Rvers Club
iRV2 No Limits Club
Join Date: May 2011
Location: Vancouver, WA
Posts: 37,726
I had to take one of my double sliding doors out to repair the damage they did at Cummins NW in Portland OR when rebuilding the engine. They broke the door as you can see in the pictures. Just throwing the white plastic lever allows the door to come down off the hangers. Don't you just love how the forum turns the pictures upside down?
Attached Thumbnails
Click image for larger version

Name:	20150428_081731.jpg
Views:	73
Size:	257.1 KB
ID:	170802   Click image for larger version

Name:	20150428_082356.jpg
Views:	79
Size:	191.5 KB
ID:	170804  

__________________
2009 45' Magna 630 w/Cummins ISX 650 HP/1950 Lbs Ft, HWH Active Air
Charter Good Sam Lifetime Member, FMCA,
RV'ing since 1957, NRA Benefactor Life, towing '21 Jeep JLU Rubicon Ecodiesel
Mr_D is offline   Reply With Quote
Old 08-11-2017, 11:42 AM   #5
Senior Member
 
camperkids's Avatar
 
Join Date: Aug 2011
Location: Bel Air, Maryland
Posts: 253
UPDATE

Quote:
Originally Posted by gerdutch View Post
My p[cket door hangs on two sliding knobs and can be released by sticking a flat screwdriver at each one and unlocking the retainer . Easy enough to do. But do you have enough clearance to remove the door or will you need to remove some trim?!
Just like you and MrD said, I had to remove some framing to gain access to the rollers to unlock them then remove the door. I had just enough room to move the old washer out and the new one in. I want to thank you both for the help. If Moms happy I'm happy.
__________________
Jim/Lois 1999 Newmar Mountain Aire MACA3797 F53 - V10
Bel Air, Maryland 5 Star Tuning & Air Lift Bags
camperkids is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Washers for Splendide 2000s lenOrge RV Systems & Appliances 3 07-06-2015 01:44 PM
Bounder: Splendide not splendid pcurt23 Fleetwood Owner's Forum 3 03-24-2014 08:51 AM
Splendid 2100 lint trap ? Larry & Rita Monaco Owner's Forum 7 02-22-2013 10:41 PM
Splendid Washers shadrack RV Systems & Appliances 15 02-13-2010 04:41 AM
Splendid 2100 vs 2000 W/D John_Canfield Winnebago Industries Owner's Forum 14 02-06-2005 02:38 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 02:49 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2023, vBulletin Solutions, Inc.