Has anyone been able to clean the clear-coat off their alloy wheels when corrosion gets under it and starts discoloring the bright wheel? I know this means extra work keeping them clean and shiny without the clearcoat but they look terrible the way they are discoloring.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Yes, I removed the clear coat from a set of Alcoa wheels using various solvents and very, very fine steel wool. Lots of elbow grease, but when finished and polished, they looked great. Just be careful with the steel wool, and be sure it does not scratch the aluminum.
Good Luck
CarlGeo
Linear Mode
