My 2004 Sunova became locked up and I had to disable the parking brake to get the wheels moving again. Now I am listening to the warning beeper all the time the coach is moving. I cannot find the wire to get rid of the sound. I can trace it to the instrument panel but all the wires go into a circuit board and I have no way of knowing which wire to disable without tearing into the circuit board which I don't want to do. Any ideas on what I can do to fix the problem?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Ain't no circuit board that beeps. Your alarm is under there, try looking again. What your looking for is something like a flasher that needs to be unplugged.
There's probably a sensor on the actual parking brake mechanism. It thinks the parking brake is still applied. It's doing it's job. Release the parking brake and the noise should stop.
There's probably a sensor on the actual parking brake mechanism. It thinks the parking brake is still applied. It's doing it's job. Release the parking brake and the noise should stop.
__________________ Dan & Loretta, US Army Retired Aero Scout Pilot
2012 Fleetwood Providence 42P Class A/DP
Spartan Chassis, 8.9L Cummins 450HP
Linear Mode
