Screen door hard to open and close
A few years ago I "kissed" one of those concrete pylons that was protecting a building corner with the bottom hinge on our entry door. Not bad, just a little yellow paint that I scrubbed off the door. Ever since then the screen door sits a little cock-eyed in the frame.
It didnít become a problem until I removed the doors in order to swap refrigerators recently. Now the screen door catches on the frame side of the latch and I have to twist the frame a bit to get it to close. There is less space between the door and the door frame at the bottom.
Any suggestions for how to make it close easier?
Barb (RVM18) & Lily (Maltese/Yorkie) RIP Sena FMCA#F466348
"Homer" Ď11 Shasta Cynara, pulling "Ranger" '97 Ford Ranger toad
The Journey is Our Destination. Full-timing since 5/18/2011