|
10-16-2007, 07:04 AM
|
#1
|
Senior Member
Join Date: Mar 2006
Location: Spokane Valley, WA
Posts: 202
|
I own a 1997 Sandpiper (by Forest River) 25FLS and want to know if the fit of the slide is adjustable. When closed the top of the slide pull in beyond the outside wall of the trailer whereas the bottom of the slide comes flush with the outside wall. I'm concerned that having the top suck in that tight might pull too tightly on the rubber seal.
I noticed there are 3 vertical lugs on the outside frame at the bottom of the slide. Perhaps these are adjustment lugs/screws??
I realize I obviously can take this to a RV repair shop, but thought I'd inquire here first to see if anyone has any first hand knowledge.
__________________
2004 Chevy Silverado 2500HD - Duramax/Allison
2009 Komfort Trialblazer 285S
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
10-16-2007, 07:04 AM
|
#2
|
Senior Member
Join Date: Mar 2006
Location: Spokane Valley, WA
Posts: 202
|
I own a 1997 Sandpiper (by Forest River) 25FLS and want to know if the fit of the slide is adjustable. When closed the top of the slide pull in beyond the outside wall of the trailer whereas the bottom of the slide comes flush with the outside wall. I'm concerned that having the top suck in that tight might pull too tightly on the rubber seal.
I noticed there are 3 vertical lugs on the outside frame at the bottom of the slide. Perhaps these are adjustment lugs/screws??
I realize I obviously can take this to a RV repair shop, but thought I'd inquire here first to see if anyone has any first hand knowledge.
__________________
2004 Chevy Silverado 2500HD - Duramax/Allison
2009 Komfort Trialblazer 285S
|
|
|
10-17-2007, 12:55 AM
|
#3
|
Moderator Emeritus
Country Coach Owners Club Appalachian Campers Gulf Streamers Club
Join Date: Mar 2000
Location: Chattanooga, Tn.
Posts: 12,060
|
The slides do have some adjustment variables available. If the top is too far in you may be able to drop the outside wall down to even the plumbness of the wall. Be sure to not only check in when retracted but also when fully extended. Good luck and let us know the results.
__________________
Mike, RVIA & RVSA Certified Master RV Technician
Amy, Dr. Assistant - Roxie & Mei Ling, four legs each
2000 Gulf Stream Scenic Cruiser 450 hp & 1330# torque
06 Saturn Vue, 06 Chevy Z71 4x4 & 2014 Corvette Z51 M7
|
|
|
10-17-2007, 05:40 AM
|
#4
|
Senior Member
Join Date: Mar 2006
Location: Spokane Valley, WA
Posts: 202
|
Thanks Mike - I figured it's possible but my real question is how to make the adjusment. I see by your signature that you are a "Master RV Tech" -- can you advise me how to make the adjustment?? Perhaps the lugs I mentioned in my original post??
__________________
2004 Chevy Silverado 2500HD - Duramax/Allison
2009 Komfort Trialblazer 285S
|
|
|
10-17-2007, 07:08 AM
|
#5
|
Moderator Emeritus
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
|
Not sure you have same slide setup but worth a try within following link there is info on how to adjust slide. Slide adjustment
|
|
|
10-17-2007, 10:23 PM
|
#6
|
Moderator Emeritus
Country Coach Owners Club Appalachian Campers Gulf Streamers Club
Join Date: Mar 2000
Location: Chattanooga, Tn.
Posts: 12,060
|
Riverdog, you probably have a Lippert slideout design. If you will get me more information of the slideout mechanizm, I can probalby send you the service manual in a pdf file that will be easier than me trying to guess and explain.
__________________
Mike, RVIA & RVSA Certified Master RV Technician
Amy, Dr. Assistant - Roxie & Mei Ling, four legs each
2000 Gulf Stream Scenic Cruiser 450 hp & 1330# torque
06 Saturn Vue, 06 Chevy Z71 4x4 & 2014 Corvette Z51 M7
|
|
|
10-18-2007, 05:45 AM
|
#7
|
Senior Member
Join Date: Mar 2006
Location: Spokane Valley, WA
Posts: 202
|
Thanks RV Wizard --- I'm taking it on our maiden voyage this weekend (leave tomorrow morning). I'll take some pictures and look and see if I can determine the make and post this on Monday. I appreciate your help.
__________________
2004 Chevy Silverado 2500HD - Duramax/Allison
2009 Komfort Trialblazer 285S
|
|
|
10-25-2007, 08:33 AM
|
#8
|
Senior Member
Join Date: Mar 2006
Location: Spokane Valley, WA
Posts: 202
|
RV Wizard,
I couldn't find a lable on the slide that said who made it. I looked underneath and on all sides & found nothing. I found a name on the motor but it appears to be just the motor manufacturers name.
I did take 5 pictures of the slide & what I think is the adjustment mechanism but can't find how to attach the pictures to this reply. Can you point me in the right direction on that?
Thanks.......
__________________
2004 Chevy Silverado 2500HD - Duramax/Allison
2009 Komfort Trialblazer 285S
|
|
|
10-25-2007, 07:53 PM
|
#9
|
Senior Member
Monaco Owners Club Excel Owners Club
Join Date: Nov 2006
Location: Hangin' with Sacs and the Pins
Posts: 9,412
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content"> I did take 5 pictures of the slide & what I think is the adjustment mechanism but can't find how to attach the pictures to this reply. Can you point me in the right direction on that? </div></BLOCKQUOTE>Riverdog...
You will probably find the info you need if you go to this post
Good luck...You can always PM me if you need a little more help...
__________________
MM
*MonacoMama with the 2 Pins & SacsTC Nearby* *2007 Monaco Diplomat 40' SFT<>2006 Chevy VortecMax Toad<>2006 Buick Lucerne Leading the Way*
|
|
|
10-26-2007, 07:41 AM
|
#10
|
Senior Member
Join Date: Mar 2006
Location: Spokane Valley, WA
Posts: 202
|
__________________
2004 Chevy Silverado 2500HD - Duramax/Allison
2009 Komfort Trialblazer 285S
|
|
|
10-26-2007, 07:44 AM
|
#11
|
Senior Member
Join Date: Mar 2006
Location: Spokane Valley, WA
Posts: 202
|
Looks like I botched that up pretty good - only one pic came across full size. Can I just link to the album?
__________________
2004 Chevy Silverado 2500HD - Duramax/Allison
2009 Komfort Trialblazer 285S
|
|
|
10-27-2007, 12:42 AM
|
#12
|
Moderator Emeritus
Country Coach Owners Club Appalachian Campers Gulf Streamers Club
Join Date: Mar 2000
Location: Chattanooga, Tn.
Posts: 12,060
|
Riverdog, yes these bolts in your photos will make the adjustments. The vertical one will allow the actual adjustment and the horizontals will hold it in position. Loosen the horizontals first, adjust and then retighten. I think you need to drop the oustide slide wall some. Make sure that it seals in both positions; in and out. Good luck and let me know if you need anything else.
__________________
Mike, RVIA & RVSA Certified Master RV Technician
Amy, Dr. Assistant - Roxie & Mei Ling, four legs each
2000 Gulf Stream Scenic Cruiser 450 hp & 1330# torque
06 Saturn Vue, 06 Chevy Z71 4x4 & 2014 Corvette Z51 M7
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|