Community Forums

Bill Grimsle · 04-26-2019, 05:26 AM

2007 Damon Astoria Pacifica; passenger side slide has been working great with no noise or problem until yesterday. Went to retract and would not move (after I brought in other 2 slides). Checked for obstructions and could find none. Tried again and it moved in 1/4 inch so I kept depressing switch until in all the way. Depressed switch and went out fine and stopped at 12" out. Then depressed the switch multiple times to move slide in 1/4 inch with each depression of switch. Any ideas on problem?

egwilly · 04-26-2019, 08:20 AM

Check your batteries for state of charge.

Plug into shore power and try it.

Eric n Karen · 04-28-2019, 05:15 AM

Sounds like low power to the slide. Make sure engine is running and batteries have a full charge, then try it again.

Cat320 · 04-28-2019, 07:03 PM

Try high idle.

Wmjp · 04-29-2019, 12:59 AM

Quote:

Originally Posted by Bill Grimsle

2007 Damon Astoria Pacifica; passenger side slide has been working great with no noise or problem until yesterday. Went to retract and would not move (after I brought in other 2 slides). Checked for obstructions and could find none. Tried again and it moved in 1/4 inch so I kept depressing switch until in all the way. Depressed switch and went out fine and stopped at 12" out. Then depressed the switch multiple times to move slide in 1/4 inch with each depression of switch. Any ideas on problem?

Sounds like a voltage supply issue vs. mechanical. IMHO

Bill Grimsle · 05-20-2019, 12:52 PM

Thank you all for lyou replies. Have found works great with on 50 amp shorepower or gen on. Otherwise, even showing 12.7 v. on batteries it is a hassle.