Hello all, first time on this forum and need your expert advice. I have a 2008 Fleetwood Prowler 2702BS TT that I bought used and has had severe sun damage. I replaced the vent over the bed as it was cracked and disintegrated when I removed it. The vent over the power vent in the bathroom is still okay, but I am unable to identify the vent or the power vent manufacturer. I have looked online at vents and power vent assemblies but can't identify. The vent nor the motor has any manufacturer name on it.
I have included pictures (not very good) of the vent cover and the circuit board (maybe this has a clue) to help ID.
If this isn't enough, I'll post more pictures, but this forum is very frustrating in getting the right combination to get pictures posted without being automatically logged out and being put back to the beginning of the process. I have A method now, but some other options on the site don't work.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Hello all, first time on this forum and need your expert advice. I have a 2008 Fleetwood Prowler 2702BS TT that I bought used and has had severe sun damage. I replaced the vent over the bed as it was cracked and disintegrated when I removed it. The vent over the power vent in the bathroom is still okay, but I am unable to identify the vent or the power vent manufacturer. I have looked online at vents and power vent assemblies but can't identify. The vent nor the motor has any manufacturer name on it.
Update on the unidentified power vent. It is a Shurflo, which I understand is not desirable.
No problems with mine--yet. Vent covers available for $62. I think I will install a rainvent over it to protect from additional UV damage for the time being until the motor quits.
Thanks for all the suggestions!
I think Mel has come as close. I haven't seen your vent but in any case check the measurements of the Maxair it should work. Good luck.
Linear Mode
