Community Forums

hohenwald48 · 02-15-2019, 05:42 PM

Bought a new motor home last August and it has a Whirlpool washer and dryer. Washer model # is WFW3090GW. It's the newer Whirlpool model with the black control panel. It's been working fine since last August by just decided to go belly up a little while ago. Will not come on at all. No lights, no nothing.

Unplugged for about 60 seconds to see if that would reset it but no change. Outlet is hot so power is available at the plug.

Opened and closed door many times, held ON button and pressed stop button many times.

Any suggestions.

ThePowells · 02-15-2019, 08:01 PM

Nothing in archives about problems. Sounds like maybe an internal fuse.

hohenwald48 · 02-16-2019, 05:17 AM

There are pages and pages of posts on here regarding problems with Whirlpool washers. Just none I can find addressing my particular problem.

If you're going to get a washer, you'd do well to get something other than a Whirlpool.

hohenwald48 · 02-23-2019, 10:21 AM

The Whirlpool guy finally made it out. Did a little checking and thinks it might be the UI board. Apparently there are only 2 boards in the washer, a UI and an ACU. He ordered both and we'll see what happens when he comes back out to replace them.

You gotta' wonder why Whirlpool would send out a repair guy with no repair parts but that's what they do. Pretty much guarantees all repairs will require 2 service calls.