Community Forums

aknavy · 06-29-2019, 09:51 PM

Anyone ever remove one and transfer to a new rig? If so, how destructive was it to the roof?

LJowdy · 06-29-2019, 11:12 PM

I've done it several times. To cover the hole for the coax wire, I bought a piece of roof flashing from Home Depot and screwed it to the roof covering the hole. Then I applied a coat of Dicor roof sealant. For the screw holes, I also applied Dicor.

aknavy · 06-30-2019, 04:29 AM

Quote:

Originally Posted by LJowdy

I've done it several times. To cover the hole for the coax wire, I bought a piece of roof flashing from Home Depot and screwed it to the roof covering the hole. Then I applied a coat of Dicor roof sealant. For the screw holes, I also applied Dicor.

I was considering leaving the coax and putting a cover over it. Just pulling the dish and the controller.