Community Forums

powerboatr · 09-21-2018, 04:05 PM

Any idea what circuits this is for or what its used for
its not plugged into anything, it was hiding behind a panel?

A32Deuce · 09-21-2018, 04:08 PM

An accessory you don't have more then likely if everything else works as it should.

l1v3fr33ord1 · 09-21-2018, 07:18 PM

powerboatr-

By the markings on the wires I'd say it's part of the multiplex control system. That's a guess, though.

powerboatr · 09-21-2018, 08:01 PM

Quote:

Originally Posted by l1v3fr33ord1

powerboatr-

By the markings on the wires I'd say it's part of the multiplex control system. That's a guess, though.

that was my guess, so next question is it viable? or where is the other end?

this is a 2008 coach,

Skip426 · 09-21-2018, 08:06 PM

Quote:

Originally Posted by A32Deuce

An accessory you don't have more then likely if everything else works as it should.

X2; If I had a $ for every unused wire behind the dash in my coach ... well I couldn't afford a new coach , but I'd have a serious down payment on a new toad.
Copper must have been very cheap in 99.

l1v3fr33ord1 · 09-22-2018, 04:34 AM

powerboatr-

I have no experience with your coach and its multiplex system, nor do I have access to wiring diagrams or manuals for same.

That said, when I cleaned up the dash wiring in our coach I took many notes, so that I could take advantage of "unused" wires for "future purposes."

The nature of a multiplex system being what it is, I suspect that the wiring pictured could be used to supply an operator's panel or a controller- that is, that the circuits are "viable."

The 3-pin connector is an AMP "Universal Mate-N-Lok,"; it would be easy to buy a matching connector. Although, I expect an operator's panel or controller may come with the connector already attached.

Is your coach manufacturer still around to answer questions?

Dutch Star Don · 09-22-2018, 11:06 AM

"powerboatr".....If you have multiplex lighting, pull one of the lighting switches and look at the back. If it's using the same plug and wires, you've answered your question. You've also found a harness where you can add another set of switches.

It might also be a multiplex harness for a water pump controller.