 |
08-28-2020, 12:26 PM
|
#1
|
Junior Member
Join Date: Mar 2011
Location: Phoenix, AZ when home
Posts: 23
|
1988 Elite 36' Motorhome
I recently purchased a 1988 Elite 36' class A motorhome. coach was produced by ELITE coach Corp in Sun Valley CA , Does anyone on the site have one? A Google search brought up very limited information and a search here produced nothing. I do have owners manuals on most of the coach and the original Gillig chassie manual. Mine is with a DD 8.2 L engine
Please respond if you have an Elite Motorhome so I know I don't own the last one.
Thanks
KECH (Ken)
Ham Radio call NX7B
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
08-28-2020, 01:21 PM
|
#2
|
Senior Member
Join Date: Jul 2018
Posts: 2,813
|
Quote:
Originally Posted by KECH_Ken
I recently purchased a 1988 Elite 36' class A motorhome. coach was produced by ELITE coach Corp in Sun Valley CA , Does anyone on the site have one? A Google search brought up very limited information and a search here produced nothing. I do have owners manuals on most of the coach and the original Gillig chassie manual. Mine is with a DD 8.2 L engine
Please respond if you have an Elite Motorhome so I know I don't own the last one.
Thanks
KECH (Ken)
Ham Radio call NX7B
|
Years ago, had a 90-91 40 footer with a Cat 3208 300 hp. Great coach very well made.
__________________
Foretravel tag axle 40 ft. 500 hp/1550 ft/lbs ism 1455 watts on the roof. 600 a/h's lithium down below.
|
|
|
03-27-2022, 12:20 AM
|
#3
|
Junior Member
Join Date: Mar 2022
Posts: 1
|
Looking for operating manuals
From Hervey Bay, Queensland, Australia.
I recently purchased a 1988 Elite RV, 36’, 300 HP Caterpillar engine, Allison Automatic Gearbox, Gilling Chassis with 73,000 miles on the clock.
I am the 3rd owner after the second owner purchased and imported it, sight unseen, from the US as it was built right hand drive, suitable already for Australian conditions.
I am looking for copies of the operating manuals that service the vehicle as the previous owner said that none came with the RV.
Please can anyone assist me? Thanks.
|
|
|
04-18-2022, 06:06 PM
|
#4
|
Junior Member
Join Date: Apr 2022
Posts: 8
|
Quote:
Originally Posted by phantomOZ
From Hervey Bay, Queensland, Australia.
I recently purchased a 1988 Elite RV, 36’, 300 HP Caterpillar engine, Allison Automatic Gearbox, Gilling Chassis with 73,000 miles on the clock.
I am the 3rd owner after the second owner purchased and imported it, sight unseen, from the US as it was built right hand drive, suitable already for Australian conditions.
I am looking for copies of the operating manuals that service the vehicle as the previous owner said that none came with the RV.
Please can anyone assist me? Thanks.
|
Hi, From Maryborough Qld, we are looking at a 33' 1990 Elite RV, 460 v8, it's on a Oshkosh chassis only problem I cannot find a manufacturers plate or VIN plate, any ideas as to where it may be? The only access door to the RV is on the right side, center of the RV, there are no doors to access the driver or passenger seats..
Cheers John
|
|
|
04-18-2022, 06:14 PM
|
#5
|
Senior Member
Freightliner Owners Club Holiday Rambler Owners Club
Join Date: Jun 2021
Posts: 1,629
|
What a great coach! If you can't find a sticker somewhere inside the coach, from the outside, look through the driver’s side windshield or search around the driver’s area of the cockpit. The VIN has to be visible from the outside of the coach and it should be on the driver's side, although occasionally, it'll be on the passenger side or somewhere in the middle.
__________________
2021 Holiday Rambler Armada 44LE
2021 Jeep Wrangler High Altitude toad w/Ready Brute Elite II
|
|
|
04-18-2022, 08:58 PM
|
#6
|
Junior Member
Join Date: Apr 2022
Posts: 8
|
OK, that was my next place to look when I go back to the RV, tho there should be a manufacturers plate with all the weight details as well, I'm going to get under it and have a good look, really, the plate should not be hidden, cheers
|
|
|
04-18-2022, 11:08 PM
|
#7
|
Junior Member
Join Date: Mar 2011
Location: Phoenix, AZ when home
Posts: 23
|
Quote:
Originally Posted by John Martin
Hi, From Maryborough Qld, we are looking at a 33' 1990 Elite RV, 460 v8, it's on a Oshkosh chassis only problem I cannot find a manufacturers plate or VIN plate, any ideas as to where it may be? The only access door to the RV is on the right side, center of the RV, there are no doors to access the driver or passenger seats..
Cheers John
|
On my 1988 Elite there is a plate over the driver's head on the sidewall which has the chassis information. Mine is built on a Gillig Chassis. In the U.S. the chassis number must also appear on the Frame mine is on the driver's side near the front.
Good Luck with yours I'm taking mine into the shop for an air leak tomorrow. Could be an airbag on the right front.
Ken
__________________
Ken (KECH) - 36' Class A Diesel Pusher by Elite (1988)
Ham radio call sign NX7B
Home Base Phoenix, AZ
|
|
|
04-20-2022, 09:26 PM
|
#8
|
Junior Member
Join Date: Apr 2022
Posts: 8
|
Whohoo, I found the plate, on the left side of the vehicle above the passenger, RHD.. lol, on the forward end of the top cupboard, there is also an import decal there as well, so made an offer on the RV today, now wait and see.., Cheers
|
|
|
04-21-2022, 03:02 AM
|
#9
|
Senior Member
Join Date: Mar 2019
Location: Braidwood Il.
Posts: 7,548
|
That turned into mini club . Post some pics ya'll. Phone app is so easy
__________________
95 Monaco Crown Royale
M11 400hp, 4060 trans.
Aquahot, Generac Guardian7.5k
|
|
|
04-21-2022, 10:13 PM
|
#10
|
Junior Member
Join Date: Apr 2022
Posts: 8
|
I will post pics when I finally pay for it and have it in my driveway.., also can anyone tell me what the frame is made of? Aluminium or wood?
Cheers John
|
|
|
01-18-2023, 07:01 PM
|
#11
|
Junior Member
Join Date: Mar 2011
Location: Phoenix, AZ when home
Posts: 23
|
Quote:
Originally Posted by phantomOZ
From Hervey Bay, Queensland, Australia.
I recently purchased a 1988 Elite RV, 36’, 300 HP Caterpillar engine, Allison Automatic Gearbox, Gilling Chassis with 73,000 miles on the clock.
I am the 3rd owner after the second owner purchased and imported it, sight unseen, from the US as it was built right hand drive, suitable already for Australian conditions.
I am looking for copies of the operating manuals that service the vehicle as the previous owner said that none came with the RV.
Please can anyone assist me? Thanks.
|
A bit late but I wonder if you found any documentation. I too have a 1988 Elite 36' and I do have some manuals like the Chassis manual and some of the appliances. Let me know if I can help. Ken
__________________
Ken (KECH) - 36' Class A Diesel Pusher by Elite (1988)
Ham radio call sign NX7B
Home Base Phoenix, AZ
|
|
|
03-23-2023, 02:28 PM
|
#12
|
Junior Member
Join Date: Sep 2020
Posts: 7
|
Quote:
Originally Posted by phantomOZ
From Hervey Bay, Queensland, Australia.
I recently purchased a 1988 Elite RV, 36’, 300 HP Caterpillar engine, Allison Automatic Gearbox, Gilling Chassis with 73,000 miles on the clock.
I am the 3rd owner after the second owner purchased and imported it, sight unseen, from the US as it was built right hand drive, suitable already for Australian conditions.
I am looking for copies of the operating manuals that service the vehicle as the previous owner said that none came with the RV.
Please can anyone assist me? Thanks.
|
Hi. I live in California and bought a 1989 about 3 years ago. It has all the manuals but it will be too much to scan it all. What are you looking for and I can see if that is in there.
|
|
|
03-24-2023, 03:47 PM
|
#13
|
Junior Member
Join Date: Apr 2022
Posts: 8
|
|
|
|
 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|