Hood vent/info center wiring harness
I have been refurbishing a 1989 Winnie Chieftain for what now seems like a life-time. When I removed my range hood vent/info center, there were three wires that pulled loose from the wiring harness. They are still attached to the connecting harness, but they pulled loose from their respective wire nuts at the bundle coming out of the wall, and I have no idea which nut each should attach to, as each nut contains more than one wire. Winnebago sent me a wiring diagram, but I can't make heads nor tails out of it.
The wires that pulled loose are:
A solid green, a solid yellow, and a white with diagonal blue stripes. All three are, I think, a 16 gauge wire
The fan and light work, so they are ok.
All the tank level sensors and propane level, give me level readings, and the water pump works. My biggest concern is whether or not one of these affects the hot water heater.
Is there anyone on this forum that can look at the wiring diagram and tell me which color wire each of these three wires should mate with? I have tried to understand the diagram, but just cannot.
Any help would be very greatly appreciated.
|