idle on 8.3 cummins - iRV2 Forums

		iRV2 Forums > iRV2.com COMMUNITY FORUMS > Vintage RV's
idle on 8.3 cummins

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.

This discussion is proudly sponsored by:

Please support our sponsors and let them know you heard about their products on iRV2

Thread Tools

Search this Thread

Display Modes

07-08-2012, 07:34 AM	#1
shadowfax51 Junior Member Join Date: Jun 2012 Posts: 21	idle on 8.3 cummins 8.3 cummins is idling way to high. What is the cause or causes that creats that.

Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Join iRV2.com For Free - Click Here

07-08-2012, 07:43 AM	#2
LeeB Senior Member Join Date: Jul 2005 Location: Central Valley, California Posts: 1,757	Not sure if this will help you but on my MH there is a switch on my dash that I can use to bring up the idle. Hope you find your answer __________________ 2020 F-150 4x4 3.5 Super Crew Cab 2024 Starcraft 189RG God Bless Us All

07-08-2012, 08:48 AM	#3
logansrun Senior Member Holiday Rambler Owners Club Join Date: Feb 2012 Location: somewhere, BC Posts: 117	You may have to adjust the stops on your linkage at the fuel pump/governor.

07-08-2012, 01:40 PM	#4
C-PHartley Senior Member Newmar Owners Club Florida Cooters Club Join Date: Apr 2011 Location: Venice, Fla. Posts: 507	I would check to be sure that there is not a bind in the cable and linkage first. A bind here would prevent the throttle from returning to idle position. I hope this helps, and be sure to let us know the solution to your problem. __________________ --Chuck 95 Newmar Kountry Star, Spartan Chassis, Venice, Fla