Community Forums

THenne1713 · 04-12-2022, 10:59 PM

MQuinn1, generally, the Best approach is identify chassis/ engine, and wiring/ system that you are having issue with, then identify specific symptoms? Chassis/engine wiring systems maybe able to Google, but it maybe separate pages vs books, maybe even multi-pages per system?? OTOH, e.g. Coach water pump usually does not CARE what brand of pump, as long as small enough to work with that wire/ fuse size? YOU/we need more info.

THenne1713 · 04-12-2022, 11:08 PM

Quote:

Originally Posted by Lee Ward

need waiting diagram for 2001 on intruder f53 chassis..need to located and identify the fuse box

Generally, the F53 chassis wiring/ chassis info available Online, and there are two fuses boxes, one FUSES at driver's foot area, the other FUSE/RELAY under hood forward of driver. The 3rd /Fourth fuse areas are generally COACH FUSES, but you have not identified which system, or what problems?

prestoni · 04-21-2022, 09:08 PM

I have operations manuals for our 2001 Haney Coach Works Renegade Classic. I am in search of parts manuals.

Mbrownm128 · 05-25-2022, 12:44 PM

Hello I purchased a 1988 national RV dolphin 3450 motor home with the upgraded John Deere chassis and the Ford 460 big block after purchasing the vehicle motorhome I took a chance and drove it was bad belts and I lost three of them on the freeway and when I say I lost I mean Dave disintegrated there was nothing left except for rubber powder kinda I have searched high and low on this motorhome for a Veebelt diagram with no success I have searched online and I have found a couple that are close but they’re not the right one I also think I read somewhere that when this RV was manufactured they didn’t have a manual for it all they ever came with was their sales brochures I don’t know how true that is but literally the only thing I can find are the sales brochures so I’ve been kind of leaning towards believing that . I have w even tried looking up different diagrams for an 88 F250 that has the 7.5 460 only to find out it isisn’t the same either. I have a total of three pumps not including the water pump all together there are 5V belts in total. Is there is anyone that can help me I would greatly appreciated it thank you

Mbrownm128 · 05-25-2022, 01:18 PM

1988 dolphin 3450 jd chassis ford 460 I was hoping someone here would know what I need to do to use my hydraulic leveling jacks. The control leavers are. Right under the drivers seat. With the key turned to the on position if I flip the switch on the control panel the lights all come on and everything but when u go to use the lever all that happens is you heat one single click otherwise nothing. I was wondering if there is a special procedure I have to do before I can get the jacks to work or can someone explain where to start troubleshooting or how to thank you

Mbrownm128 · 05-25-2022, 03:30 PM

Quote:

Originally Posted by Bobski12

I recently purchased a 1993 Minnie Winnie on a Ford E350 chassis. To my surprise, I found a three ring binder of EVERY manual - the MH, every appliance, the Onen 4K generator, the refrigerator, the Ford - everything.

If anyone needs something, I can get it scanned.

Hopefully you still have it but is there any chance you could send me wiring diagrams for the refrigerators

gts1544 · 05-25-2022, 04:26 PM

https://www.nrvclub.com/dolphin

Quote:

Originally Posted by Mbrownm128

Hello I purchased a 1988 national RV dolphin 3450 motor home with the upgraded John Deere chassis and the Ford 460 big block after purchasing the vehicle motorhome I took a chance and drove it was bad belts and I lost three of them on the freeway and when I say I lost I mean Dave disintegrated there was nothing left except for rubber powder kinda I have searched high and low on this motorhome for a Veebelt diagram with no success I have searched online and I have found a couple that are close but they’re not the right one I also think I read somewhere that when this RV was manufactured they didn’t have a manual for it all they ever came with was their sales brochures I don’t know how true that is but literally the only thing I can find are the sales brochures so I’ve been kind of leaning towards believing that . I have w even tried looking up different diagrams for an 88 F250 that has the 7.5 460 only to find out it isisn’t the same either. I have a total of three pumps not including the water pump all together there are 5V belts in total. Is there is anyone that can help me I would greatly appreciated it thank you

https://www.nrvclub.com/dolphin

You might try the National RV Club website listed above. GTS1544

Omen11737 · 05-25-2022, 10:35 PM

The john Deere chassis is basically a one ton pickup truck in disguise except for the second power steering pump try looking for a John Deere 1000 chassis belt diagram if not i may be able to get the info from a relative

Djonqson · 06-05-2022, 04:48 PM

I just purchased his motor home I need to rewire the level lysing system and I need to rewire the fuel pump can anyone please assist me

ratchet1957 · 06-12-2022, 06:56 PM

I am looking for an owner/operators manual or any info on a 1988 Ford Travel Craft Class C RV ? The only thing I got with it is the Ford Manual , I need to learn how to operate the generator as well as ALL the other stuff ANY and ALL help would be appreciated !!

Tom

Bercor58 · 07-31-2022, 01:56 PM

Wondering if somebody could point me in the right direction to have a diagram for where the relay switch would be located and to replace it on a 1999 Triple E Signature class A motorhome please or even pictures to see what the relay looks like... thank you!

THenne1713 · 07-31-2022, 11:14 PM

Quote:

Originally Posted by Bercor58

Wondering if somebody could point me in the right direction to have a diagram for where the relay switch would be located and to replace it on a 1999 Triple E Signature class A motorhome please or even pictures to see what the relay looks like... thank you!

RELAY SWITCH FOR WHAT CIRCUIT/FUNCTION?? If you are by chance talking BATTERY DISCONNECT, follow POS+ BATTERY CABLE DIRECTLY TO THE FIRST DEVICE? Otherwise, we need more detail on which circuit?

Donnybud · 08-30-2022, 12:49 PM

A few years back we bought a 2000 Harney Renegade. It came with NOTHING in the way of manuals. In the following years I have acquired the Magnum Chassis manual and manuals for several of the appliances. Now I am in desperate need of the Owners manual.

Any idea of where I can find one….either printed of digital?
Any help would be greatly appreciated.

P.S. I would gladly trade pdf file of the Magnum chassis manual.

Donald Strawn

Donnybud · 08-30-2022, 12:57 PM

Quote:

Originally Posted by Mbrownm128

1988 dolphin 3450 jd chassis ford 460 I was hoping someone here would know what I need to do to use my hydraulic leveling jacks. The control leavers are. Right under the drivers seat. With the key turned to the on position if I flip the switch on the control panel the lights all come on and everything but when u go to use the lever all that happens is you heat one single click otherwise nothing. I was wondering if there is a special procedure I have to do before I can get the jacks to work or can someone explain where to start troubleshooting or how to thank you

I don't know about the newer MHs, but in several of the older ones the keys must be in the ACC position to get the levelers to run.