Community Forums

fsandoval777 · 03-17-2014, 12:13 PM

I need a couple tail lights for my 1987 bounder I would like the bezels as well but the lenses will do

whem2fish · 03-17-2014, 12:56 PM

Can you post a pic I have some my lights were 3 rectangular the middle was white this is from a 1985

BarkerLovers · 03-17-2014, 08:07 PM

Hi, we were just at Bontrager's Surplus Inc yesterday, and Hubby got tailights for our pop up - getting it ready to sell.

They're in White Pidgeon, MI; but also sell on Ebay. It was our first time there, and they couldn't have been any nicer! They pretty much have any part you could need, and help you figure it out too!

Bontrager's # 1-866-483-7017, Bontragers Surplus Inc. |, or surplus@bontragers.com.

Good luck!

fsandoval777 · 03-18-2014, 06:12 AM

Thanks for the reply here is the picture if they are the same I would will buy them from you. I also need the bezel or box as I call it that the lenses attach to. I need the entire piece if you have them.

whem2fish · 03-18-2014, 01:32 PM

ill pm you im having the house leveled your set up is the same i have 3 red 2 white lenses the connectors were bad so i upgreded give me a bit
dave

whem2fish · 03-19-2014, 12:53 PM

Ok the house is leveled need a little touch up I have found 1 red I'm still looking they are not for sale they are free to you I upgraded let me look some more best I remember the 3 three are complete and one red lense

fsandoval777 · 03-20-2014, 08:24 AM

Thanks i will take whatever i can get, can you post a picture of them. Also do you have the whole light assembly. What i mean by that, the box that the lenses go in is what i also need. the picture i posted is what im looking for mine were damaged and i need the entire housing plus lenses

fixyourback · 03-20-2014, 08:37 PM

Hello Fsadoval777,

I also have the same RV (87 Bounder) I'm currently working on getting the outside ready for a new coat of paint. My housing for the brake lights are cracked pretty bad. The lights still work but they are really ugly and need replaced. If you run across information regarding website etc I would appreciate it. (sorry if I hijacked this thread)
Thanks,

Larry