RV furnace

[Bob_E.]

My furnace is an older hydro flame 8531-II. the gas valve is not functioning so I was going to order a new one. But it appears that part number 31155 is no longer available. Does anyone know if the gas valves are more or less the same? I found one that looks similar except the propane inlet fitting is on the side rather than the back. Mine actually has a couple of fittings that connect to the propane line in the side. So I’m wondering if this alternate part would work.

[Old-Biscuit]

Atwood/Dometic all use dual solenoid gas valve be they 12K btu rated or 40K btu rated (orifice/burner determine btu ratings)
3 versions were used
31906 ---replaced by 31155
31907 ---replaced by 31155
31908 -----current model furnaces

Might want to check out Suburban SF Series Gas Valve 161122
*Same dual 12VDC .48A just not sure about inlet/outlet thread size/type

[Bob_E.]

Thanks! This is the one I was talking about. Other than the inlet position, it looks identical to mine. I’ll give it a try and see if it works.

https://www.amazon.com/Dometic-31098-Valve-Kit/dp/B01MTUU876/ref=mp_s_a_1_3?crid=1XS07FQ4EO28O&keywords=atwood+ 31098+gas+valve&qid=1638070163&qsid=141-0123025-1263871&sprefix=atwood+31098+gas+valve%2Caps%2C437 &sr=8-3&sres=B01MTUU876%2CB003G9FQSS%2CB07RXM16VN%2CB00G 8XT9OG%2CB0007XVWWU%2CB00C5TFVK8%2CB0046HAANU%2CB0 8CTHJT3C%2CB075MNVPSX%2CB002UC18HU%2CB003G9HW08%2C B01N1MJWGH%2CB0006IX68O%2CB096ZZPD4K