Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > COMMUNITY FORUMS > Vintage RV's
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 01-27-2020, 07:31 PM   #1
Join Date: Oct 2019
Posts: 30
tv connections

i have a 97 class a motorhome with the original analog tvs and components. im not trying to upgrade or change anything, but it was all disconnected and im trying to figure out how it all gets connected like it was. there is a switch(antenna amplifier?)in the cabinet with a red led light and cigarette lighter, a rf modulator box, a magnadyne switching box, an analog pass through box, and a dvd player. can someone draw me a diagram or tell me where the cables go. I think the rf modulator would be first in line from the amplifier switch?, then the analog pass through,then switch box,dvd? bet if there was a teenager around here they could figure it out!! thanks,roger
Rmelectrical is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free! RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 01-27-2020, 07:43 PM   #2
Senior Member
450Donn's Avatar
Join Date: Jun 2006
Location: Dallas,OR
Posts: 4,584
The red light on is the OTA antenna amplifier. It must be off if your on cable.
From the coax connection next to the light is the OTA antenna input.
Everything else depends on what sorts of inpits your TV has.
Don and Lorri
Resident Dummy.
450Donn is offline   Reply With Quote
Old 01-27-2020, 08:14 PM   #3
Join Date: Oct 2019
Posts: 30
both tvs are old analog tvs...the cables going to the switching box are for bedroom tv, front tv,antenna, and outside cable. not sure whats going to the back of the antenna switch, there are 2 cables on the backside. im trying to figure iut what goes from that antenna switch to what? rf modulAtor or anslog passthrough? how was it all hooked up orginally?
Rmelectrical is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tightening Water Connections 2goldens Excel Owner's Forum 7 02-28-2009 02:31 PM
Wilson Antenna-Our Internet & Cell Phone Connections MonacoMama Technology: Internet, TV, Satellite, Cell Phones, etc. 24 02-05-2009 06:59 AM
Available wireless connections? Steve N Sal Technology: Internet, TV, Satellite, Cell Phones, etc. 19 01-01-2009 05:36 AM
gas connections (external) D and J Excel Owner's Forum 15 06-22-2007 08:47 AM
grease on 12volt connections RKL2 Winnebago Industries Owner's Forum 3 07-28-2005 01:30 PM

» Featured Campgrounds

Reviews provided by

All times are GMT -6. The time now is 09:50 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.