|
|
05-15-2014, 04:20 PM
|
#15
|
Senior Member
Join Date: Sep 2012
Posts: 1,177
|
there are some nice 12vdc units out there my setup is 8CMF at 200 psi
i am using the 5g air tank on the RV for the air brakes to hold the air
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
05-16-2014, 10:35 AM
|
#16
|
Senior Member
Join Date: May 2012
Posts: 3,816
|
Terry, are you running those through a drier?
I've been thinking about airing up my on board tanks from my pancake, but was concerned about moisture getting in to the system.
I want to do it so I don't have to let the engine run so long before leaving.
__________________
2011 MVP Tahoe 230 QB on Ford E350 Chassis
|
|
|
05-16-2014, 03:33 PM
|
#17
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: May 2012
Location: Today? Clayton, North Carolina
Posts: 5,093
|
Quote:
Originally Posted by MSHappyCampers
Bob, just curious as to why you don't use the on-board compressor?
|
The onboard compressor usually cycles between about 90 and 120 psi. If you need 105 psi or better in any tire, it can get tricky trying to tap dance with the o/b cycles.
__________________
John and Diane (RIP Lincoln, 21 FEB 22) RVM103 NHSO
Fulltimers since June, 2012
2002 Dutch Star 40, Freightliner, Cat 3126, 2004 Element
|
|
|
05-16-2014, 05:27 PM
|
#18
|
Member
Ford Super Duty Owner iRV2 No Limits Club
Join Date: Jan 2013
Location: Albuquerque, NM
Posts: 85
|
Quote:
Originally Posted by scooterbob
|
It's what I carry also. Very nice unit!
|
|
|
05-16-2014, 05:53 PM
|
#19
|
Senior Member
Join Date: Aug 2001
Location: North America somewhere
Posts: 30,971
|
Quote:
Originally Posted by PDR John
Terry, are you running those through a drier?
I've been thinking about airing up my on board tanks from my pancake, but was concerned about moisture getting in to the system.
I want to do it so I don't have to let the engine run so long before leaving.
|
I never understood the "running so long" statements. My coach will increase air pressure from 50 to 125 psi in 4 minutes, the air suspension is back up then and I'm ready to pull out.
__________________
2000 Winnebago Ultimate Freedom USQ40JD , ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;Good Sam Life member,FMCA. " My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
|
|
|
05-16-2014, 07:21 PM
|
#20
|
Senior Member
Workhorse Chassis Owner Forest River Owners Club
Join Date: Jul 2013
Posts: 239
|
Air Compressor
Quote:
Originally Posted by JFXG
The onboard compressor usually cycles between about 90 and 120 psi. If you need 105 psi or better in any tire, it can get tricky trying to tap dance with the o/b cycles.
|
The RV Geeks have an updated solution to help with this issue.
Their update is to add a second T in the supply line and add a ball valve so that you can bleed off air and force the compressor to cycle when needed while airing up tires.
This air fill tool is before adding the second T and valve. See their video update for the improvement.
Paul
__________________
Big Dog House On Wheels
2013 Coachmen Freelander 28QB
on 2012 E4500 Chevrolet chassis
|
|
|
05-16-2014, 07:42 PM
|
#21
|
Senior Member
Join Date: Sep 2012
Posts: 1,177
|
Quote:
Originally Posted by PDR John
Terry, are you running those through a drier?
I've been thinking about airing up my on board tanks from my pancake, but was concerned about moisture getting in to the system.
I want to do it so I don't have to let the engine run so long before leaving.
|
yes it is running through the RVs drier
there are 3 timers 1 to keep the system off when starting the RV
timer 2 off set the load so not all the pumps come on at the same time
timer 3 there is a 12vdc air valve that is T,,ed off to the water dump valve on the drier
this timer is 0.5 sec and works and sounds just like if your RV was running and blows the water out of the drier for you
i have a video of the system
but yes i do the same thing with it and air up the RV be for i pull out and tires air tools
8 CFM is alot of air from just a small 12v system
on the rv motor driven pump is a 14 CFM unit that is if its the bendix tu-flo 550
|
|
|
05-16-2014, 08:02 PM
|
#22
|
Senior Member
Join Date: Sep 2012
Posts: 1,177
|
Quote:
Originally Posted by terry735001
yes it is running through the drier
there are 3 timers 1 to keep the system off when starting the RV
timer 2 off set the load so not all the pumps come on at the same time
timer 3 there is a 12vcd air valve that is T,,ed off to the water dump valve on the drier
this timer is 0.5 sec and works and sounds just like if your RV was running
i have a video of the and i think how it works
but yes i do the same thing with it and air up the RV befor pull out and tires
every time they come on
|
sorry i did not have a newer pic showing the drier valve
|
|
|
05-16-2014, 08:22 PM
|
#23
|
Senior Member
Join Date: Sep 2012
Posts: 1,177
|
Quote:
Originally Posted by Ray,IN
I never understood the "running so long" statements. My coach will increase air pressure from 50 to 125 psi in 4 minutes, the air suspension is back up then and I'm ready to pull out.
|
after looking up your
2000 Winnebago Ultimate Freedom USQ40JD, ISC 8.3 Cummins 350, Spartan MM Chassis. USA
and looking at pics of the motor installed in your unit it looks like your air pump is 3 sizes higher ..... i am guessing here ....
if i am looking at the right unit and pics your adds up to the upper bendix 750 units at 20 to 24 CFM ...all most 2 times the air of a 14 CFM units
if your time is 3 to 5 mins we are 10
|
|
|
05-16-2014, 09:03 PM
|
#24
|
Senior Member
Newmar Owners Club Freightliner Owners Club
Join Date: May 2012
Location: Today? Clayton, North Carolina
Posts: 5,093
|
Quote:
Originally Posted by B D HOWie
The RV Geeks have an updated solution...... add a second T in the supply line and add a ball valve..... force the compressor to cycle.....
|
Paul.... Thanks, I saw these threads months ago. Frankly, I don't see the point. Unless your game is the fun of the design (which is ok), after you're done with the fittings you still have to tap dance with the onboard compressor. My objective is to air the tires that need 110-115psi. I went to HF, bought a nice little 150psi 110V compressor that does the job nicely without playing games, fits in a belly bay, and comes in handy from time to time on other projects. Hundred bucks. Problem solved. Easy beans.
__________________
John and Diane (RIP Lincoln, 21 FEB 22) RVM103 NHSO
Fulltimers since June, 2012
2002 Dutch Star 40, Freightliner, Cat 3126, 2004 Element
|
|
|
05-17-2014, 07:51 AM
|
#25
|
Senior Member
Join Date: May 2012
Posts: 3,816
|
Terry- Thank you for the follow up photos. Do you have any links to where you purchased all the parts?
Quote:
Originally Posted by Ray,IN
I never understood the "running so long" statements. My coach will increase air pressure from 50 to 125 psi in 4 minutes, the air suspension is back up then and I'm ready to pull out.
|
It's really a 2 part reason: Yes 4-5 mins is not that long, longer time if tanks are 0. However at 6 am parked next to a popup, 5 min is an eternity to people trying to sleep.
I try not to be that guy.
SECOND- Boondocking air. I already have 8 house batteries, why not tie into them for air? It's not like 1 or 2 of those compressors running for 10 mins will do anything to my power supply. However, firing up my genny or main engine just to adjust a tires pressure is silly.
__________________
2011 MVP Tahoe 230 QB on Ford E350 Chassis
|
|
|
05-18-2014, 08:16 AM
|
#26
|
Senior Member
Vintage RV Owners Club Fleetwood Owners Club
Join Date: Mar 2013
Location: c above
Posts: 5,525
|
My problem is none of my storage compartments are big enough to fit a compressor in.
I suppose I could store it in the trunk of the toad, but what to do if we don't have the toad?
Any Ideas?
Thanks Tim
__________________
1982 Pace Arrow P30 454
KarKaddy SS, Toad: 2009 Genesis
Tim, Joe and Lilly too. Mpls Minn.
|
|
|
05-18-2014, 11:28 AM
|
#27
|
Senior Member
Triple E Owners Club Freightliner Owners Club
Join Date: Dec 2011
Location: Winnipeg, MB, Canada
Posts: 140
|
I like the Porter Cable 120V 4 Gal pancake oil-free compressor Model C2004-WK which I have been using for the past few years with great success. My MH tires require 120 lbs pressure which this relatively quiet compact unit handles without difficulty. The compressor features a cut-out max pressure of 165 PSI and a cut-in startup pressure of 135 PSI. It weighs approximately 30 lbs and is easily stored in a basement compartment. It comes with a 25' x 1/4" hose which I replaced with a higher quality 50' x 1/4" coiled hose for utility and convenience.
Once pressurized, I can quickly check and top-up my 6 coach tires (or the toad) as required, usually with the pump cutting in perhaps once if at all. Here is a link for more details on this unit:
http://www.portercable.com/products/...roductID=16710
__________________
Hugh & Judy with Golden Retrievers Arvy & Will in 2009 Triple E Invitation 40' QSDP, FL-XCR, Cummins 8.9L ISL 400HP, Allison 3000MH towing 2020 Jeep Grand Cherokee
|
|
|
05-18-2014, 01:24 PM
|
#28
|
Junior Member
Join Date: Mar 2014
Posts: 2
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|