Hi, the automatic steps on my '11 Astoria have just started popping on full retraction and full extension. They pop 5 or 6times then stop and stay in the proper position. Does anyone have any ideas? Any help would be greatly appreciated.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
There are a few reasons that may cause popping. First, lubricate the moving parts, check for loose mounting screws/bolts, some have a cam like adjustment disk that the step settles on to lock it in place. It may need adjusted. The suggestion of broken teeth is a good one as well.
There are a few reasons that may cause popping. First, lubricate the moving parts, check for loose mounting screws/bolts, some have a cam like adjustment disk that the step settles on to lock it in place. It may need adjusted. The suggestion of broken teeth is a good one as well.
the step actuator is actually an automobile power window actuator. do a forum search for part numbers.
__________________
01 WINNEBAGO 35U W20.8.1L 5sp allison SW Wa,. Good Sam, SKP. RVM 198 AMSOIL fluids. BANKS ecm program. SCAN GAUGE II w/ Ally temp. 2 LIFELINE GPL-6CT AGM Batts on their sides. Michelins, TST tptts. K&N panel air filter. AERO mufflers. TAYLOR plug wires. ULTRA POWER track bar. KONI fsd shocks, toad '21MB GLA FWD on dolly