|
05-15-2015, 10:57 AM
|
#1
|
Junior Member
Join Date: May 2015
Posts: 4
|
Awning fabric retaining screws
I need to get 4 awning fabric retaining screws, the type that slide into the groove where the awning edge slips in on a roll-out awning. I have Googled and Yahooed but can't find a supplier. Any help will be greatly appreciated.
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
05-15-2015, 11:47 AM
|
#2
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,486
|
On my 5 RVs and numerous repairs for friends, I've never seen anything that comes close to that particular retainer.
What type of coach and awning brand ; power or manual; are you working on .
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
05-15-2015, 12:05 PM
|
#3
|
Junior Member
Join Date: May 2015
Posts: 4
|
Thanks for reply. I need fabric retainer screws or stops for a roll-out awning on a cottage. After extensive Googling, I found more discussions of awnings on RV sites than other sites. Are there other devices that would fit in an awning channel and act as stops?
|
|
|
05-15-2015, 12:18 PM
|
#4
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,486
|
Most RV awnings I've seen , have a rubber expansion cord through the fabric roll and the installer leaves about 2" of the rubber out past the fabric , then runs a tiny screw through the rubber and channel to stop any movement.
That's on the RV end wall mount , on the roller tube , the fabric and rubber are friction fit, I've had mine move slightly in the wind and had to re-square the fabric to retract the awning.
My guess is they don't want holes allowing water into the tube , rust the spring and add weight.
The part you're after looks like a good idea, sorry I can't help you find any , could you re-post if you do find a supplier. Thanks.
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
05-15-2015, 12:23 PM
|
#5
|
Junior Member
Join Date: May 2015
Posts: 4
|
Thanks for that info. Will definitely repost if I find a source. Happy RVing!
|
|
|
05-15-2015, 11:47 PM
|
#6
|
Senior Member
Join Date: Aug 2001
Location: North America somewhere
Posts: 30,964
|
Measure the dia. of that "screw" and match it to an Allen socket screw, which also has no head. It will be hard enough to cut its own threads into the aluminum C channel.(will hold the same as that knurl)
Most RV's though just run a sheet-metal screw through the C-channel and the very end of the awning welt on one end. If both ends are fastened tight, the awning material cannot expand/contract at the welt.
__________________
2000 Winnebago Ultimate Freedom USQ40JD , ISC 8.3 Cummins 350, Spartan MM Chassis. USA IN 1SG 11B5MX,Infantry retired;Good Sam Life member,FMCA. " My fellow Americans, ask not what your country can do for you, ask what you can do for your country. John F. Kennedy
|
|
|
05-17-2015, 06:12 AM
|
#7
|
Junior Member
Join Date: May 2015
Posts: 4
|
Many thanks for that great suggestion!! Will try it. Having read other postings on this site, I am getting the urge to buy a RV.....seems like a great community to join.
|
|
|
05-17-2015, 10:42 AM
|
#8
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,486
|
Quote:
Originally Posted by donwigle
Many thanks for that great suggestion!! Will try it. Having read other postings on this site, I am getting the urge to buy a RV.....seems like a great community to join.
|
You wouldn't regret it, and we'll be happy to have you.
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|