I had some issues with the screws coming out on my luggage doors so had to remove the beltline trim to get to them. Why do they use screws that can rust and break? Anyway, had to remove the rubber trim that is part of the beltline trim. It's about 35 feet long, 3/4 in. wide, has and runs along the top of the beltline trim. Hopefully the pictures explain it. Two of the pics are the beltline trim with the rubber piece in it. The third is the beltline trim without the rubber trim.
Any idea where I can get the piece of rubber trim?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
If you send a small sample to "Steele Rubber" they might be able to match yours. However, it will not be Blue.
Mike in Colorado
__________________
2004 Fleetwood Pace Arrow 37c, 8.1 gasser, (Jezebel) Ultra RV ECM / TCM and rear track bar, PPE deep Tx pan, Bilstein's, Sailun's & Sumo's all round, pushed by a 2002 Grand Caravan, on a Master Tow Dolly.
I can't quite tell how it attaches ...is there a groove on both top and bottom? ...it looks like some kind of attachment configuration at top but is it the same on the bottom?
Linear Mode
