Community Forums

Kmerrill · 09-25-2021, 08:47 AM

I have a 2013 Winnebago Adventurer. The original BIM (Precision Circuits 00-10021-000) bad. Precision Circuits has since discontinued this BIM. They have replaced it with 00-10041-250. The original BIM has 6 connections, the new one only has 5 connections. The connection that's missing is for the genset. I can't get an answer from Precision Circuits as to what to do. Has anyone dealt with this? Thanks in advance, Keith.

twinboat · 09-25-2021, 10:14 AM

Don't worry about the generator connection.

It's there to disable the solenoid so you don't sometimes get an errant ALT light.

I'll bet over half the RV don't have the generator sense hooked up.

Kmerrill · 09-25-2021, 03:07 PM

Thanks for the feedback (twinboat). I appreciate it

757driver · 09-27-2021, 08:51 AM

Quote:

Originally Posted by Kmerrill

I have a 2013 Winnebago Adventurer. The original BIM (Precision Circuits 00-10021-000) bad. Precision Circuits has since discontinued this BIM. They have replaced it with 00-10041-250. The original BIM has 6 connections, the new one only has 5 connections. The connection that's missing is for the genset. I can't get an answer from Precision Circuits as to what to do. Has anyone dealt with this? Thanks in advance, Keith.

Upgraded mine a few years ago to the lithium model and ran into the same problem. Just cap the generator wire off and you will be fine.