Chassie lube diaigram

[stuck in first]

Where can I find a diagram of the lube points on my Workhorse chassie and what grade grease do I use.
Thanks
squeeky in the South

[stuck in first]

Where can I find a diagram of the lube points on my Workhorse chassie and what grade grease do I use.
Thanks
squeeky in the South

[Chipworkz]

Or you can download a larger version here.
Lube Points

I am not sure on the grease since I haven't had to do mine yet.
Hope this helps

[Mutha]

Grease with the spec <span class="ev_code_RED">NLGI #2</span> is used for DOT 3 thru 8 truck chassis, which includes All class A gas rigs. The car and light weight truck ( up to 3/4) will use grease with the NLGI #1 spec on the container.

Best to ya - Glenn

[stuck in first]

chipworkz thanks for the reply. The diagram was just what I need.
Glenn thanks for the grease info "Grease with the spec NLGI #2 is used for DOT 3 thru 8 truck chassis, which includes All class A gas rigs". So now comes the fun part.
Slipping & slideing
Dennis

[Mahlon]

Your chassis may or may not have zerk fittings where you expect them to be (my front U-joint doesn't have a zerk; the driveshaft slip joint does). So grease / lube what you can & leave alone what you can't.

[Clay L]

You can download a Workhorse Chassis guide. Go to the Workhorse forum here on this site for the download info.
I have 13 zerts total on the drive line and front end. All of my u-joints have zerts.