Quote:
Originally Posted by Craig P.
Is the cover rolled up inside the container? If it is, it would have to be stored sideways, on one end of the roll. I'm trying to visualize how one would pull it out, without it unraveling before getting it up to the roof. Do you recall where you saw the video?
Craig
|
I have tried to find the video but no luck.
Basically, the sides of the cover are pulled up so the whole cover is laying on the roof top. Then it was fed down into the container (large plastic garbage can on wheels for easy moving) by a person at the container on the ground (don't think it would matter if you had the container at the front or rear) with a 2nd person on the roof to guide it along. The cover was stuffed into the plastic container and the lid goes on for storage.
To put it back on, park the container at the front (or rear, depending how it was removed) of the RV, tie a rope to the cover and begin to pull it out of the container and along the length of the roof.
Once you have it stretched out along the roof, drop the sides over for tie down.
I will keep looking for the video and post it if I come across it again.