Community Forums

William Unruh · 09-17-2006, 08:15 AM

I just replaced the front TV in my 2003 Winnebago. The problem I am experiencing is that the new TV's volume controls (remote and TV) is not working with the surrond sound system. The volume with the surrond sound on, is constant (loud) and not changing. the TV speaker volume changes but not the external surrond speakers. Has anyone else had this happen.

Bill Unruh

William Unruh · 09-17-2006, 08:15 AM

I just replaced the front TV in my 2003 Winnebago. The problem I am experiencing is that the new TV's volume controls (remote and TV) is not working with the surrond sound system. The volume with the surrond sound on, is constant (loud) and not changing. the TV speaker volume changes but not the external surrond speakers. Has anyone else had this happen.

Bill Unruh

Our Cow · 09-17-2006, 09:22 AM

Check all you plugs and make sure they are in the right ports! Also you may have to turn off TV speakers and use the sound system seperately. If I remember right I had to do that in my Adventurer.....Good Luck!

Happy Trails! Jim

"007" · 09-17-2006, 02:39 PM

Welcome Bill to irv2

Not sure how you have hooked up your TV into your surround system. If your surround sys is using a DVD player for watching movies or such you may need a RFC control from RADIO Shack. I installed a DVD,FM.CD surround system and used this control to auto switch surround sys video to operate TV and use only the surround sys 5.1 spk system. The control cost about $15 and you wire your TV cable thru it, if your not playing a DVD your TV will operate normally.