|
|
06-01-2020, 09:59 PM
|
#1
|
Junior Member
Join Date: May 2020
Location: Green Bay, WI
Posts: 20
|
Gel coat question
How can I tell if I have a gel coat on my rv. I have a 2002 Winnabago Journey.
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
06-02-2020, 03:54 AM
|
#2
|
Senior Member
Join Date: Aug 2015
Posts: 6,975
|
Dan-
First off, welcome to iRV2!
Second, you should add a "signature" to your profile. It contains whatever info you want; most people put info about their coach there, so they don't have to type it into each message. Instructions for adding a signature are here.
Per the 2002 Journey brochure (link here), all 2002 Journeys (both base and DL models) came from the factory with:
1) white fiberglass exteriors, and so have "gel coat"
2) paint below the beltrail
3) "graphics" (that is, decals) above the beltrail
Of course, a prior owner could have made changes.
Winnebago provides a lot of information about their motorhomes at this link. If you have not yet done so, you should go through the links and download the documents that apply to your coach.
"Lombardi Legacy- Leaders made here"
__________________
Mark
2008 Holiday Rambler Admiral 30PDD (Ford F-53 chassis)
2009 Honda Fit Sport
|
|
|
06-02-2020, 07:55 AM
|
#3
|
Senior Member
Winnebago Owners Club Freightliner Owners Club
Join Date: Sep 2015
Location: Saskatchewan
Posts: 281
|
Welcome..
I have the same MH, enjoy.. Keep in mind, do not wax the gelcoat otherwise you will get serious chalking...they do also have a tendency to chalk in the sun. I had mine wet-sanded and buffed this past winter and she looks good.
__________________
2002 Winnebago Journey DL 39QD,
'94 Jeep Wrangler,
2016 RK,'72 FX
|
|
|
06-02-2020, 08:00 AM
|
#4
|
Junior Member
Join Date: May 2020
Location: Green Bay, WI
Posts: 20
|
Thanks for the reply
|
|
|
06-04-2020, 06:46 PM
|
#5
|
Senior Member
Join Date: Feb 2015
Posts: 720
|
Quote:
Originally Posted by Petesflhtk
I have the same MH, enjoy.. Keep in mind, do not wax the gelcoat otherwise you will get serious chalking...they do also have a tendency to chalk in the sun. I had mine wet-sanded and buffed this past winter and she looks good.
|
I have never heard of not waxing gelcoat. I have compounded mine and wax it 2 x per year and it shines like a baby. the Chalk is oxidation and waxing helps remove and prevent it.
__________________
Frank, Columbus, Ohio
2001 Itasca Horizon Cat 3126B 330hp, 2018 Jeep GC Limited, EPS harness or 24' Enclosed Car Hauler
|
|
|
06-04-2020, 07:15 PM
|
#6
|
Senior Member
Join Date: Nov 2006
Location: Western NY
Posts: 6,150
|
Quote:
Originally Posted by ftodaro
I have never heard of not waxing gelcoat. I have compounded mine and wax it 2 x per year and it shines like a baby. the Chalk is oxidation and waxing helps remove and prevent it.
|
Quote:
Originally Posted by Petesflhtk
I have the same MH, enjoy.. Keep in mind, do not wax the gelcoat otherwise you will get serious chalking...they do also have a tendency to chalk in the sun. I had mine wet-sanded and buffed this past winter and she looks good.
|
I have no idea where the no wax idea would come from? Maybe a detailer that wants more business restoring oxidized finish???
I have had numerous fiberglass/gelcoat boats and motorhomes and periodic clean & wax helps protect & preserve the finish and helps avoid the tougher job of restoring the shine once it chaulks.
Many owners have their favorite wax products (I've used and like Collinite products) but have switched to polymers for both boat and motorhome. I have read good reviews and like Gel Coat Labs polymers for unpainted gel coat as I believe it lasts much longer than conventional wax and is much easier on/off.
The key to wax or polymer is prepping the surface which will vary depending on the condition to start. If Good to start with with little oxidation a mild polish / swirl remover or cleaner /polish will do fine. Once more seriously oxidized it will take a more aggressive compound to start with followed by the swirl remover/ polish.
Once you have the shine you want by all means protect it with a polymer or natural wax. It will last longer, look better and clean dirt, burd droppings, etc off much easier.
__________________
Don & Marge
'13 Newmar Ventana 3433 - '14 CR-V TOAD
'03 Winnebago Adventurer 31Y - SOLD
|
|
|
06-04-2020, 09:45 PM
|
#7
|
Senior Member
Join Date: May 2017
Location: Metamora, MI
Posts: 5,525
|
Most all fiberglass parts have Gelcoat. The real question is if the Gelcoat is painted or not. Paint when new is generally shinier than even new Gelcoat. If there is metalflake, then it is more likely to be paint. If the stripes are decals, then its more likely that the places where there is no decals, is gelcoat. if the coach is a high line, with "full body paint", then it's paint.
When a fiberglass part is made, the negative mold is first sprayed with a wax / release agent. Then, the mold is spray painted with GelCoat. Then the fiberglass is either sprayed into the mold (chop strand) or "laid" into the mold. Once the fiberglass resin is cured, the part is then popped out of the mold. The part is then assembled to the RV. The part may then be painted.
__________________
2002 Newmar Mountain Aire Limited 4370 w/ Spartan K2 and Cummins 500hp
ASE Master Certified (a long.....time ago...)
|
|
|
06-06-2020, 04:49 PM
|
#8
|
Moderator Emeritus
Join Date: Jan 2000
Location: West Palm Beach, FL. USA
Posts: 27,704
|
Edited to remove previous reply
__________________
Gary Brinck
Former owner of 2004 American Tradition and several other RVs
Home is West Palm Beach, FL
|
|
|
06-06-2020, 04:57 PM
|
#9
|
Moderator Emeritus
Join Date: Jan 2000
Location: West Palm Beach, FL. USA
Posts: 27,704
|
Chalking is due to oxidation of the surface and occurs independent of whether you wax or not. I've never before seen it claimed that waxing causes chalking. Certainly didn't on any of my fiberglass RVs.
Most Corvette cars are lovingly waxed. So are fiberglass boats.
__________________
Gary Brinck
Former owner of 2004 American Tradition and several other RVs
Home is West Palm Beach, FL
|
|
|
06-06-2020, 05:04 PM
|
#10
|
Moderator Emeritus
Join Date: Jan 2000
Location: West Palm Beach, FL. USA
Posts: 27,704
|
Are you asking specifically about fiberglass surface produced by the process known as gel coating, or simply any sort of fiberglass surface? Most RV fiberglass sidewalls and roofs are a fiberglass sheet material known generically as filon. It's laminated to make sidewalls and laid as a flexible sheet for roofing. Filon is typically painted with at least a clear coat but more upscale models have full body paint in color(s).
Gel coating is a high quality fiberglass layer produced by spraying or pouring fiberglass resin into a mold, i.e. molded fiberglass. The front and rear caps on a fiberglass RV are often produced by the gel coat process. Gel coat has the colr embedded in it and does not require painting or sealing.
__________________
Gary Brinck
Former owner of 2004 American Tradition and several other RVs
Home is West Palm Beach, FL
|
|
|
06-06-2020, 06:39 PM
|
#11
|
Senior Member
Join Date: Nov 2006
Location: Western NY
Posts: 6,150
|
"Gel coat has the colr embedded in it and does not require painting or sealing."
Yes... but... thecsame can be said of any finish on cars, boats or RVs.
You dont HAVE TO do anything to the surface but if you do it will not only look better but will stay looking better longer.
I had many compliments on my prior '03 Winnbgo that it looked like new. But I did use wax & polymers to keep the surface looking good and protect it from UV. Even the vinyl decals looked decent after 12 yrs.
If you dont believe the above leave it alone and enjoy the free time and $avings.
__________________
Don & Marge
'13 Newmar Ventana 3433 - '14 CR-V TOAD
'03 Winnebago Adventurer 31Y - SOLD
|
|
|
06-07-2020, 05:45 AM
|
#12
|
Senior Member
Join Date: May 2017
Location: Metamora, MI
Posts: 5,525
|
Corvettes (at least the older ones) are fiberglass, do have gel coat and are always painted. So the analogy is not a good one as you are waxing PAINT.
Most smaller boats on the other hand are also fiberglass, also have gel coat, but are typically Not then painted. And respond well to wax too. Boats are much more subject to getting bumped. So the thickness of gel coat is an advantage compared to paint as it doesn't chip or scratch as easily. And you can sand / buff / wax the scratched gel coat deeper than you can paint.
As mentioned above, most all fiberglass parts are gel coated. Some are then painted.
Filon is almost never clear coated without color paint. That is not cost productive (about the same labor as paint / clear coat) nor provide any customer benefit so it's not done. If the filon is painted...it's color coated / clear coated for appearance improvement (typically full body paint rigs).
But I do agree. Wax will help protect both paint and gel coat. Keeping the surface shiny, slippery will help reduce staining and mold and allow for easier maintenance.
What kills both is sunlight.
__________________
2002 Newmar Mountain Aire Limited 4370 w/ Spartan K2 and Cummins 500hp
ASE Master Certified (a long.....time ago...)
|
|
|
06-07-2020, 08:25 AM
|
#13
|
Junior Member
Join Date: May 2020
Location: Green Bay, WI
Posts: 20
|
Thanks for all the insight. My walls are very blotchy looking. Almost like the finish is worn to the point where the substrate is showing through. Also in many areas it is scratched like someone used sandpaper. I am the fourth owner of this mh I believe. I'm thinking painting is my only recourse to make it look good again.
__________________
Dan Niesing
2002 Winnebago Journey 32T
|
|
|
06-07-2020, 11:34 AM
|
#14
|
Moderator Emeritus
Join Date: Jan 2000
Location: West Palm Beach, FL. USA
Posts: 27,704
|
Without seeing them, I can confidently predict your sidewalls are laminated filon panels, almost surely painted, and your front & rear caps are molded fiberglass with a gel coated outer surface. Below the beltline, the bay doors will be painted and probably made with a metal skin over a frame.
Any of those surfaces can be sanded and painted.
__________________
Gary Brinck
Former owner of 2004 American Tradition and several other RVs
Home is West Palm Beach, FL
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|