My front Power Gear slide also quit working, I sourced a new motor from Veurinks in Michigan, it was about $850.
But I kept the old motor and when I had time I took it apart to see what was wrong, found nothing but did a good cleaning and reset the brushes onto the armature with a piece of sandpaper. Put it back together and it worked fine.
I provided this advice to another IRV2'r recently and he did the same thing and it worked. You might try doing the same thing.
__________________
Jim J
2002 Monaco Windsor 38 PKD Cummins ISC 350 8.3L
2005 Jeep Grand Cherokee w/5.7 Hemi
|