Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > MOTORHOME FORUMS > MH-General Discussions & Problems
Click Here to Login
Register FilesVendors Registry Blogs FAQ Community Calendar Today's Posts Search Log in
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 05-01-2007, 05:23 PM   #1
Junior Member
 
dhind's Avatar
 
Workhorse Chassis Owner
Join Date: Mar 2007
Location: Calgary, Alberta, Canada
Posts: 27
I left this problem with my RV dealer, unfortunately he does not have a lot of experience with hydraulic jack systems and suggests oil was spilled when it was filled. The coach is new (although it has sat in the lot for 2 years) and I may have been the first to use the jack system. The jack system seemed to work normally. I looked around the unit and could not find any obvious leaks, but there sure seems to be a lot of oil on the main cylinder.

Were do you normally fill this unit and how do you check level?

Comments and thoughts from the experts?



You can see the main cylinder is coated in an oil film. I do not know if this oil was on the unit before I used the jacks. There was no sign of oil under the coach after the jacks were extended for on evening.



You can actually see a drip of oil at the bottom the the drain plug. There is no sign of oil spraying around under the coach. The Coach only have 3900 km on it and has never been used.



The hoses appear to be dry and no sign of oil. The oil film start at the fill plugs? at the top. Although the fill plugs appear to be coated with oil as well.
__________________
2005 Trail-Aire 351

Workhorse W22
dhind is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 05-01-2007, 05:23 PM   #2
Junior Member
 
dhind's Avatar
 
Workhorse Chassis Owner
Join Date: Mar 2007
Location: Calgary, Alberta, Canada
Posts: 27
I left this problem with my RV dealer, unfortunately he does not have a lot of experience with hydraulic jack systems and suggests oil was spilled when it was filled. The coach is new (although it has sat in the lot for 2 years) and I may have been the first to use the jack system. The jack system seemed to work normally. I looked around the unit and could not find any obvious leaks, but there sure seems to be a lot of oil on the main cylinder.

Were do you normally fill this unit and how do you check level?

Comments and thoughts from the experts?



You can see the main cylinder is coated in an oil film. I do not know if this oil was on the unit before I used the jacks. There was no sign of oil under the coach after the jacks were extended for on evening.



You can actually see a drip of oil at the bottom the the drain plug. There is no sign of oil spraying around under the coach. The Coach only have 3900 km on it and has never been used.



The hoses appear to be dry and no sign of oil. The oil film start at the fill plugs? at the top. Although the fill plugs appear to be coated with oil as well.
__________________
2005 Trail-Aire 351

Workhorse W22
dhind is offline   Reply With Quote
Old 05-02-2007, 12:12 AM   #3
Moderator Emeritus
 
RV Wizard's Avatar


 
Country Coach Owners Club
Appalachian Campers
Gulf Streamers Club
Join Date: Mar 2000
Location: Chattanooga, Tn.
Posts: 12,060
The system will be fill at the resevoir next to the pump. If all appears normal and no increase in evidence of oil under the coach, I would say that you have a good system and not to worry. If you insist they may give you an extended warranty to ease your mind and for them to make the deal. GOod luck and enjoy the forum.
__________________
Mike, RVIA & RVSA Certified Master RV Technician
Amy, Dr. Assistant - Roxie & Mei Ling, four legs each
2000 Gulf Stream Scenic Cruiser 450 hp & 1330# torque
06 Saturn Vue, 06 Chevy Z71 4x4 & 2014 Corvette Z51 M7
RV Wizard is offline   Reply With Quote
Old 05-02-2007, 04:05 AM   #4
Senior Member
 
GStream40's Avatar
 
Join Date: Feb 2000
Location: Navarre, Ohio
Posts: 262
You can search the Power Gear website for the model of system you have for the manual.

Power Gear Link

Ron
__________________
Gulf Stream RV Owners Forum www.gsowners.com

GStream40 is offline   Reply With Quote
Old 05-02-2007, 05:01 AM   #5
Moderator Emeritus
 
Gary RVRoamer's Avatar


 
Join Date: Jan 2000
Location: West Palm Beach, FL. USA
Posts: 27,704
I suggest that you spray the unit with a liquid detergent and rinse it off, to remove the existing oil film. Then watch to see if and where the hydraulic fluid re-appears.
__________________
Gary Brinck
Former owner of 2004 American Tradition and several other RVs
Home is West Palm Beach, FL
Gary RVRoamer is offline   Reply With Quote
Old 05-02-2007, 03:15 PM   #6
Senior Member
 
Roland's Avatar
 
Monaco Owners Club
Join Date: Apr 2002
Location: On top of Windy Hill - Florida
Posts: 141
dhind,

When you turn the key "on" and retract your jacks, start your engine and the "jacks down" light is "OFF" and the warning bell is silent you have sufficient fluid in the reservoir.

Look at your third picture. Do you see the black hex head plug in the top of the reservoir, just above the white nylon hex plug with the two red wires(fluid level float switch) in the middle? That is the fill plug.

One way to fill the reservoir is: Starting with all jacks retracted; extend one jack approx. 6 inches. With the ignition key turned "ON" so you can hear the alarm bell -- fill until the bell stops dinging. Replace the filler plug and retract the jack.

It dosen't sound like you have a problem now, unless the "Jacks Down" light won't go out with all the jacks up.

P.S.: Good pictures!
__________________
Roland, Diane & Katie - the furry 4-footed kid
'01 Diplomat - ISC330 - Allison MD3060 - Progressive Ind. EMS-50C - Hughes Autoformer - '06 Jeep Liberty CRD
Roland is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Leaking Motor/Pump on my Power Gear Levelers Mr.Steve MH-General Discussions & Problems 2 03-02-2008 01:06 PM
Leveler Power GLTaylor Winnebago Industries Owner's Forum 3 03-09-2007 05:13 AM
Help - Power Gear JJ Simba05 FLSTCI02 Monaco Owner's Forum 16 12-31-2006 08:12 PM
Urgent help needed with leaking A/C abarkl MH-General Discussions & Problems 16 07-04-2006 04:21 PM
Power Gear slide gear box---help! Ragman MH-General Discussions & Problems 6 06-20-2006 04:38 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 01:39 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.