Community Forums

katmclat · 06-30-2016, 06:56 PM

We have a 2006 Damon Challenger 370F with the Lippert LCI automatic leveling system. The legs will operate fine in 'manual' mode, but not in the 'auto' mode. We can put them down in 'manual' and then try to retract in 'auto' and they will come up, but the pump continues to run until it times out. They will not extend in auto at all. We have tried a lot of stuff, even called Lippert 3 times, but no luck. If anyone has had this problem I would appreciate knowing your solution. Fluid level is full and no hydraulic leaks.

RV Wizard · 07-01-2016, 01:45 AM

Hello and

We are glad to have you join us here and we look forward to reading of your adventures and experiences. I am sure you will enjoy our website and forums. Good luck, stay safe and keep us posted.

You need to set the "Zero Point" OWNERS MANUAL - Lippert Components, Inc. (LCIâ„¢)

Once you have the Zero Point programmed you should be able to auto level.

katmclat · 07-02-2016, 06:51 AM

Thanks RV Wizard, but we already tried that and it didn't work.

Yesterday, we tried disconnecting the pressure switch and were able to get them working. Had to reconnect it to get them to come back up, and the pump continued to run. 'Jacks down' light on, and 'right' flashing. We have decided that the pressure switch is stuck and need to replace it. Has anyone done this? Is it a hard job? How is it done?