I have a 2011 Fleetwood Providence 40K. I found I had a leak from the Half bath above my wet bay. I tried to investigate the source but the is a board in the vanity that I can’t seem to remove nondestructively. Does anyone know the secret to removing this board?
Thanks in advance!
__________________
2011 Fleetwood Providence 40K
~~Enjoying life one weekend at a time~~
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I'm not familiar with your particular cabinet, but in the past I've taken a 6" hole saw and cut out a part of the cabinet. It's big enough to get your hand through for repairs then you can get a plastic hole access cover to cover it up. this way in the future, you'll have access if needed. Some covers unscrew off, others are hinged. Lots of choices and sizes.
__________________
Bill & Brigitte
06 Windsor PEQ, Cummins 400 ISL
2014 Honda CRV or 2012 Jeep
The one time I needed access to that type area, I just carefully pulled the panel off the finishing nails for access. Then put the panel back in place with screws when finished.
I ended up pulling the finished board away and will use screws to reattach. Thanks for all of the possible solutions. I appreciate your time to replay!
I am now in the same boat for the floor of the cabinet. I will try to pull it up in a similar fashion.
__________________
2011 Fleetwood Providence 40K
~~Enjoying life one weekend at a time~~
Linear Mode
