Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > MOTORHOME FORUMS > MH-General Discussions & Problems
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 04-22-2022, 08:37 PM   #1
Junior Member
 
Join Date: Apr 2022
Posts: 2
Power gear leveling system

Hi, I have a used power gear leveling system I am installing in my sightseer. I donít have the control pad and would like to build a simple rocker switch system instead of buying retrofit system for big money. I cannot find used ones for under $600. Wondering if anyone has done this and how you built it to get some ideas. The pad that was with the pump and jacks, which are intact, is #500210. Obsolete. Pump works, solenoids good. I uninstalled the system from a 98 bounder and left all wiring intact. Any help would be appreciated.
Dmscarp is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 04-23-2022, 05:37 AM   #2
YC1
Senior Member
 
YC1's Avatar


 
Join Date: Jun 2011
Location: FL
Posts: 10,993
https://1drv.ms/u/s!Aqrv2TUdbV6xj1wG...PcSPM?e=U00Oxs

Download this folder. There is a schematic with pinout for my system. It is a three leveler system on mine.

If yours is like this one it would be easy enough to install a few switches. Of course the safety pinout and issues must be addressed.
__________________
Certified Senior Electronic Technician, Telecommunications Engineer, Telecommunications repair Service Center Owner, Original owner HR 2008

.
YC1 is offline   Reply With Quote
Old 04-23-2022, 07:51 PM   #3
Junior Member
 
Join Date: Apr 2022
Posts: 2
Thank you.
Dmscarp is offline   Reply With Quote
Reply

Tags
500210, leveling, leveling system, power, power gear



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Power Gear gear slipping on axle. Just a pin holding gear in place? mjeffrey RV Systems & Appliances 2 05-03-2019 09:19 AM
Power Gear leveling system not AUTO leveling coach to true level ualdriver MH-General Discussions & Problems 6 08-17-2016 05:48 PM
Power gear leveling gear no power BoPeg MH-General Discussions & Problems 5 05-22-2012 09:22 AM
Power Gear Leveling System Alarm itdave Monaco Owner's Forum 4 08-26-2007 11:28 AM
Power gear leveling system cdroggen RV Systems & Appliances 5 07-26-2006 07:22 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 03:19 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2023, vBulletin Solutions, Inc.